Establishment of EPS light Weight Wall Panel Production Base of S.L Machinery in UAE

---The annual treatment capacity of 300,000 tons of construction waste can reach US $30 million

Reporter Li Yangyu, correspondent Chen Qingqiu text / picture

A large electronic screen and a cross-ocean video meeting connection; a conversation without face-to-face and handshake celebration... Recently, an on line meeting for signed cooperation was held in the conference room of Quanzhou S.L Machinery in Xiamei town.

At the ceremony, S.L Machinery signed a strategic cooperation contract with Dubai G prefabricated parts Group, announcing the formal establishment of the UAE branch. The two parties will create a first-class EPS light weight wall panel manufacture base in the overseas market industry in combination with each other's 40 years of industry experience, which serves the local advanced environmental protection building system, and also rely on this base to provide advanced green environmental protection building system services for the world.

"Cloud signing" to jointly cultivate the Middle East market

The COVID-19 epidemic situation can not stop the two parties' hand in hand ', which is different from the previous 'meeting with face-to-face' scene. This time, we set up a 'screen to screen' cloud contract through the network bridge, speeding up the negotiation progress and the implementation of the project." Fu Xiaobin, General manager of S.L Machinery, happily shared that the signed contract has been marked the close cooperation in the environmental protection building between the management team of G prefabricated parts Group and the technical team of S.L Machinery.

It is reported that Dubai G prefabricated parts Group is subordinate to one of the largest construction companies in India and has a branch in Dubai. Combined with the local needs for the development of green, energy-saving and prefabricated environmental protection building system, the customer began to conduct a detailed investigation and comparison of many well-known building material machinery manufacturers in the world in 2015, and finally finalized the cooperation with S.L Machinery in 2017. In the same year, the order equipment was successfully delivered. Up to now, S.L Machinery has supplied three light energy-saving wall panel machine production lines for it.

"With the smooth operation of light and energy-saving wall panel production lines in Dubai, Gautam prefabricated parts company has rapidly expanded business opportunities in the Middle East market. Its products are exported to the European Union, and they highly recognize the technical strength of our equipment. After many coordination and discussions, the two sides have reached a consensus and established a strategic alliance for long-term cooperation." Fu Xiaobin said that although the epidemic makes it less convenient to go abroad to develop markets, services and after-sales, he hopes that through this cooperation, the two sides will jointly deepen the markets in the Middle East and Europe to achieve mutual win-win and common development.

In recent years, driven by policies, prefabricated buildings at home and abroad have developed rapidly, and prefabricated buildings that build houses like "building blocks" have also become a new trend in the construction industry. In the Middle East and the European Union, prefabricated buildings have been developed and applied on a large scale since the 1960s and 1970s. At this stage, the UAE market not only emphasizes the application of prefabricated buildings in the overall construction process, but also emphasizes that basic building materials should have integrated temperature and energy conservation performance.

"As the main component of the green and energy-saving building system, this is also the next R & D and key research direction of G prefabricated parts group and S.L Machinery in Dubai. In the application process of our prefabricated building materials, we should not only achieve the rapid and convenient systematic construction of prefabricated buildings, but also achieve the integration of thermal insulation wall materials in the green and environment-friendly building system." From "serving customers", "deep users" to "partners", Dubai G prefabricated parts group perfectly complete the transformation of identity. Fu Xiaobin believes that this is just the beginning.

The two parties integrate existing technologies, products and service resources, form a joint force from green and energy-saving buildings, and jointly create a new situation for the in-depth development and wide area prosperity of the market they serve. It is estimated that after the UAE branch is put into operation in 2022, 300,000 tons of construction waste can be treated annually for the production of wall panels, with an annual output value of US $30 million.

Synchronize equipment and technology with the world

In the office, in the short video displayed by Fu Xiaobin, the reporter saw that only the raw materials need to be injected into the automatic grouting system of the light insulation EPS wall panel making machine production line. After a series of automatic assembly line operations, one side of the wall panel was born 30 minutes later and stacked neatly together. 

"The products made of different raw materials also have different characteristics of heat insulation, thermal insulation, frost resistance and sound insulation. The performance of the horizontal double-layer wall panel machine production line is improved on the basis of the vertical wall panel machine production line, which not only avoids some potential operation hazards that may exist in the operation of the traditional vertical wall panel machine production line, but also improves the work of the production line High efficiency and high forming rate. " Fu Xiaobin said, for example, with the increase of labor cost, the improvement of environmental protection requirements, the improvement of Labor Occupational Health and working environment, each EPS wall panel making machine is equipped with a separate hydraulic power device to realize squeezing and loosening, which better solves the problems of manual operation, high labor intensity and low efficiency in the traditional production line, and is equipped with a sewage recovery system.

Since the operation after the production of the wall panel is completely dry operation and assembly construction, the average skilled worker can ship more than 35 square meters a day if the wall height is less than 4 meters, and the two sides of the wall panel are flat without plastering. After installation, other decorations can be carried out simultaneously. Fu Xiaobin told reporters that the width and length can also be arbitrarily cut and adjusted according to the needs of the building structure, which reduces the material loss rate and construction waste, achieves the effect of simple transportation, sanitary stacking, no mortar swing, and shortens the construction period.

In fact, one belt, one road, was actively responding to the national call as early as in 2015. The products exported to Saudi Arabia, the Middle East, Russia, Philippines, Burma, Vietnam and other dozens of countries and regions, when foreign trade sales increased by 15%. Strengthen scientific and technological innovation and realize overtaking on curves in the same year. After expert appraisal and evaluation organized by Fujian Provincial Commission of industry and information technology, its automatic production line of composite light insulation wall panel for construction has reached the leading level in China; Take the lead in developing new products such as self insulation foamed concrete blocks for exterior walls, start the battle of green building environmental protection, reduce energy consumption and promote the concept of green environmental protection. Domestic new energy-saving wall panel projects account for half of the country; In 2017, the automatic production line of vertical formwork composite light energy-saving wall panel was recognized as the first major equipment (set) in Fujian Province.

"At present, we need at least 4 automatic mixing and demoulding stations to complete the automatic demoulding operation of the original production line, which is also suitable for the automatic demoulding of the product." In order to facilitate overseas market promotion, Fu Xiaobin admitted that the R & D Department of the company has made a lot of efforts in the process of finished products, making the products more diverse. It can produce wall panel products with and without fiber cement board (FCB), which can be applicable to customer groups with different needs, so as to ensure the rapid economic benefits after the project is put into operation.

As a national leading enterprise of new wall materials and equipment and a benchmark enterprise of national wall materials innovation and innovation in the 12th Five Year Plan, S.L Machinery is an industry leading enterprise in the production of prefabricated building equipment. Most of its customers are prefabricated building materials enterprises. The light wall panel produced meet the hot market demand of prefabricated parts and are a sharp weapon for China's infrastructure speed, It also contributes to the construction of prefabricated buildings overseas. Next, S.L Machinery will also closely follow the national high-quality development plan to create innovative intelligent manufacturing, environmental protection and energy-saving equipment, so that the equipment technology of S.L Machinery can keep pace with the world.

S.L Machinery makes perfect construction, professionally focus on light weight 3d wall panel machine, sandwich panel machine, EPS wall panel making machine production line, high end servo system concrete block machine, concrete mixing plant etc. Warmly welcome to contact us by email jerry@sl-machine.com.